Silicone cases come in handy to protect our phones from damage caused by an impact and also provide aesthetic values. With time, however, silicone cases tend to get dirty, usually accompanied by a yellow color change. The reason for this is that they’re constantly exposed to environmental conditions such as UV, radiation, humidity, heat, dust, friction, grime etc. resulting in stains as well as wear and tear.
This is something you’re currently experiencing or have probably experienced at one point. Your once beautiful silicone phone case turns out to be grim with an unattractive yellow. Fortunately, it’s possible to clean your dirty silicone phone case or Otterbox silicone case and restore it to its original color free of dirt, lint and germs. Read on to find out how to clean a silicone cases for iPhones and Airpods as well as Otterbox silicone cases.
How to Keep Silicone Case Clean
As mentioned earlier, silicone cases get dirty quite fast. They get inundated with all sorts of dirt, dust, pocket debris, finger oil etc. In the long run, silicone cases turn yellow due to the continuous exposure of UV light.
It’s therefore imperative to keep your phone case clean to prevent the accumulation of bacteria and other germs which pose a risk to your health. Additionally, a clean silicone case is aesthetically beautiful and speaks volume regarding your personality.
Keeping your silicone case clean warrants regular cleaning and disinfection. You can maybe clean your silicone case twice a month and disinfect it inside and outside at least once a week to keep it clean. In cleaning silicone cases, there are two different avenues you can use depending on how dirty the case is.
For instance, small stains and dirt can easily be removed by the use of dish soap. On the contrary, tougher stains require the use of baking soda with a bit of scrubbing using a toothbrush.
How to Disinfect Silicone Case Once a Week
You need to disinfect your silicone phone case at least once a week to prevent the buildup of bacteria and other germs that may cause flu or other diseases. Follow the steps below to disinfect your phone case.
- Remove Phone out of its Case
For thorough disinfection, the phone should be separated from its case. Sanitizing the case while still intact with the phone will not be effective as bacteria, and other germs may be harbored between the phone and its case. Therefore, always take out your phone from its case. Then, disinfect both the inside and outside of the silicone case.
- Wipe using a Disinfecting Wipe
Next, using an alcohol-based disinfecting wipe, wipe the entire silicone case both on the inside and outside. Be sure to wipe all corners where germs usually tend to hide. The rubbing alcohol will kill all germs living your case clean.
- Use Isopropyl Alcohol
Alternatively, you can use isopropyl alcohol instead of disinfecting wipes. Simply soak a cotton swab or cotton ball with isopropyl alcohol. Then wipe both the inner and outer surfaces of the phone case using the alcohol-soaked cotton.
- Let the Silicone Case Dry Before Putting Back the Case
Air your silicone case for up to five minutes to let it dry completely. Then put it back on your phone. Make sure the case is totally dry as any remaining moisture in the pockets could damage your phone.
How to Clean A Silicone Case Twice a Month
Washing your silicone phone case twice a month will keep it clean and prolong its life. Small stains are easily removed by dishwashing liquid while tougher stains can be removed by the use of isopropyl alcohol or baking soda. Follow the below steps to clean your phone case twice a month.
- Remove Your Phone from Its Case
As always, the first step is to separate the silicone case from the phone. Silicone cases are generally flexible; thus, you shouldn’t have any problem removing the phone from the case. Simply stretch a corner of your case and pull out your phone. Follow up by lifting the phone all-around silicone case until the phone is fully out. Care should, however, be taken when pulling out the phone to avoid damaging or tearing the silicone case.
- Add Two Drops of Dish Washing Liquid to 1 Cup of Warm Water
Warm soapy water is quite effective in cleaning generally dirty silicone phone cases. Add about 240 ml of dishwashing liquid to a cup of warm water, preferably in a wide bowl. Stir the mixture to ensure the soap dissolves properly.
- Scrub with Toothbrush
Proceed by dipping a clean toothbrush in the soap mixture and let it soak by about 1-2 minutes. Apply the foam to the silicone case and then scrub a small circular motion. Your area of concern should be stains or thickened dirt. Dip the toothbrush back into the soapy water now and then to get enough soap for a deep clean.
- Removing Stubborn Stains
For stubborn stains such as grime, caked-on dirt, lint or other debris, dish cleaning soap may not be effective. You can use a small amount of baking soda to remove such stains. Simply sprinkle a pinch of baking soda directly on the stubborn stain and scrub with a toothbrush.
- Rinse Away the Soap with Clean Running Water
When you’re done with the scrubbing and all that, the next step is to rinse the soap off your phone in the sink. It’s recommended to use warm running water as opposed to cold or very hot water. Also, as you rinse, try to rub the case with your hands gently making sure no soap remains on it.
- Put Your Silicone Case Out to Dry
After you’re done washing, wipe the case with a paper towel to remove the water droplet. Then, air out the case for about an hour to completely try. Before putting back the phone, ensure the case is totally dried. Just a little moisture may damage the phone or provide a suitable environment for the growth of mold and the buildup of bacteria.
How to Clean Silicone iPhone Case
Your silicone iPhone case accumulates dirt, germs and filth from your pockets, sweat and oil from your hands and the countless tops you place your phone. It’s vital to regularly clean and disinfect your case to get rid of germs, grime and other stains.
Cleaning your iPhone silicone case is a very simple task, and you really don’t need the help of an expert. Simply DIY with using locally available household items and following the correct procedure. Depending on how dirty the case is, there are three ways of cleaning it.
Dish soap is effective in removing small stains and dirt. Medium to tough stains can be removed by the use of isopropyl alcohol or baking soda. Here is how to clean a silicone iPhone case.
|Apple Silicone Case (for iPhone Xs) - Black||1,609 Reviews||$12.59||Check on Amazon|
Household Items Needed to Clean your Phone Case
- Warm water
- Grease-cutting dish soap
- Lint-free microfiber cloth/ A soft cloth
- A soft-bristled toothbrush
- Isopropyl alcohol
- Baking soda.
Method 1: How to Clean A Silicone Case with Soap and Water
- Remove the silicone case from your phone
The first step is to remove your silicone phone case from your phone carefully. Never try to clean the case with your iPhone attached. Water or the cleaning liquid may damage the phone, especially if it’s not IP rated. Also, try to place your phone away from the cleaning area to prevent unnecessary accidents. For two-pieced silicone cases, separate them and clean each individually for the best result.
- Mix dish soap and warm water in a small bowl
After you’re done with removing your phone from the silicone case, proceed by mixing warm water and dish soap in a small bowl. In a bowl containing 1 cup (240 mL), add 2 to 3 drops of dish soap. Stir the mixture until it’s soapy. Don’t use mild soap as it can damage the silicone case.
- Scrub the case with a soft-bristled toothbrush soaked in the soapy water
Deep the toothbrush in the warm soapy water and let it soak in the soapy water. Using the toothbrush, scrub the entire case both on the exterior and interior in a circular motion. Put more emphasis on stained spots. Ensure you also scrub tough-to-reach parts such as camera, volume and charge port openings.
Rinse the case and repeat this step if necessary. If you notice any debris left on the case after scrubbing and rinsing repeatedly, you can use a pencil eraser to scrub up the debris even those embedded in the tough-to-reach spots.
- Rinse the case with clean, warm running water
After you’re done with the scrubbing and are satisfied with the results, rinse the case in your sink with running water-preferably warm. Ensure you rinse all of the soap up to the hard-to-reach spots.
- Dry the case with a clean microfiber cloth or towel
Next, dry the case using a clean towel or microfiber cloth. First, shake off excess moisture then, dry wipe the entire case from inside to outside. Try to eliminate as much moisture and possible such that the case takes less time to air dry.
- Let the silicone case air dry for 1 hour.
Even after dry wiping, the case will still have some moisture on it. Place it on a countertop with plenty of air circulation. Leave for at least one hour to dry fully before putting your phone back on it. Always make sure the entire case even in the smaller opening such as the charging pot is totally dry. You wouldn’t want moisture to damage your phone.
Method 2: How to Clean A Silicone Case with Isopropyl Alcohol
If for instance, you’ve cleaned your silicone case with dish soap and still notice some dirt remnants or stains, don’t fuss. You can still achieve a clean case by cleaning using isopropyl alcohol. This method also sanitizes your phone case leaving it free of bacteria and other disease-causing germs. Proceed as follows.
- Carefully remove the silicone case from your phone.
- Sprinkle small amounts of isopropyl alcohol onto a clean microfiber cloth
Using only a little bit of rubbing alcohol, dampen a clean microfiber cloth. You can also soak the cloth in the rubbing alcohol then shake and wring out the excess moisture before cleaning your phone case. Similarly, you can use rubbing alcohol-soaked cleaning wipes.
Alternatively, you can use a spray bottle to get the rubbing alcohol to the case directly. However, you should be extra careful to avoid soaking the case. Only apply the required amount.
- Scrub the silicone case
Next, use the damp cloth to scrub the stains on the case placed into your sink. Wipe the case in a circular motion scrubbing tough stains you come across. Ensure you touch on hard to reach spots such as the case’s edges and openings where the dirt and grime tend to hide. Notice how the tough stains and dirt are easily removed by the rubbing alcohol
- Dry-wipe the case with a clean towel or microfiber cloth
Once you’re done with wiping the entire case with rubbing alcohol, you would want to dry wipe the case to remove any leftover alcohol. Wipe using a clean microfiber cloth making sure you remove all the remaining rubbing alcohol. As you wipe down the case, any remaining stain or dirt will also come off. Your case should be completely dry once you’re done dry wiping.
- Let the silicone case air dry for 1 hour.
Place the silicone case in an open aerated area such as a table or on a countertop. While rubbing alcohol dries much faster compared to water, you’ll still leave the case to dry completely. This will ensure your phone is protected from moisture damage. To shorten the drying time, you can open the windows or turn on fans. Once the case is completely dry, put it back on your phone.
While cleaning your iPhone silicone case with isopropyl alcohol, not all silicone cases can be cleaned by isopropyl alcohol. For instance, rubbing alcohol is counter recommended for cleaning Presidio Clear, Speck CandyShell, and Presidio STAY CLEAR cases. It can potentially discolor some clear silicone cases. It’s therefore essential to consult with the manufacturer before embarking on cleaning your silicone case using isopropyl alcohol.
Method 3: How to Clean A Silicone Case with Baking Soda
Baking soda offers an effective solution to yellowing or tough, stubborn stains which cannot be removed by either dish soap or rubbing alcohol. For the third cleaning method, use the below steps.
- Take your phone out of the case and set it aside.
- Sprinkle baking soda over the entire case
Place the case in either a clean towel or in your kitchen or bathroom sink. Ensure the stains, dirt or grime face upwards then sprinkle baking soda covering the entire surface. The stains should be entirely covered in baking soda.
- Scrub the phone with a wet soft-bristled toothbrush
For the next step, dampen a clean soft-bristled toothbrush then scrub the phone case with a wet toothbrush in a circular motion. Ensure you scrub the entire case up to hard-to-reach places such as openings and edges.
If you notice the toothbrush drying out, dip it in water or hold it under running water in your sink.
- Rinse the phone case in clean, warm running water
After intense scrubbing, rinse off the case using warm running water. Scrub using a toothbrush to eliminate any remaining debris. Keep scrubbing and rinsing until all the baking soda is eliminated.
- Wipe the case dry with a clean cloth
After rinsing, shake out the excess moisture. Then, wipe the case dry with a clean cloth removing as much moisture as possible. Also, wipe off the remaining debris. Remember also to wipe hard to reach areas such as openings and case’s corners.
- Wash again with soap and water
You would want to wash again with dish soap in warm water to remove some leftover baking soda. Also, washing again will clear off any remaining light stains and debris.
- Wipe and air dry
Next, wipe the case using a clean, dry cloth to remove any moisture. Then, place the case on a clean towel over a countertop to air dry for about one hour. Open windows or turn on nearby fans for air to flow throughout the room. Place your phone back on once the case dries completely.
How to Clean Silicone AirPods Case
Silicone AirPods cases just like silicone phone cases get dirty over time. They accumulate grime, dirt, lint, dust and other junk which ruin their beautiful white appearance and make them less durable. Most owners usually clean their AirPods wireless headphones but forget to clean the charging and storage case. Regularly cleaning your silicone AirPods would maintain hygiene, functionality and even extend its life. Here is how to clean silicone AirPods Case
|Compatible AirPods Pro Case Cover Silicone...||9,446 Reviews||$4.99||Check on Amazon|
Cleaning the Exterior
- Wipe with a clean microfiber cloth
Start cleaning the exterior by wiping down the case with a clean microfiber cloth. Try to get rid of any tender grime, lint, dirt, dust, wax etc.
- Dampen the microfiber cloth with isopropyl alcohol
For more difficult stains, dirt, or grime, dampen the cloth using a small amount of isopropyl alcohol. Then wipe down the exterior and dry off using a dry clean cloth. Make sure no liquid gets into the charging pots as AirPods and the storage case are not resistant to liquids
- Use Cotton Swab to Clean the Outside
Use a cotton swab to wipe hard to reach areas on the outside of the case, i.e. crannies and nooks. If necessary, dampen the cotton swab in isopropyl alcohol to remove more difficult, caked-on dirt and grime.
Cleaning the Interior
- Wipe down the charging ports
Wipe down the charging ports using a cotton ball or cotton swab. You can also use a clean, dry, soft-bristled brush to remove any debris from the Lightning connector. Never use abrasive materials such as toothpicks and sharp metal objects to clean the charging ports. The metal contacts could easily be damaged. You can use an anti-static brush or a clean cotton brush.
- Cleaning the grooves
Clean the grooves on top of the case using a slightly damp cotton swab. Don’t soak the cotton swab in alcohol or little water.
- Removing dirt from fissure and cracks
Use a wooden or plastic toothpick to remove dirt and stubborn grime from cracks and fissure in the interior of the case, especially in areas surrounding the lid.
How to Clean Silicone Otterbox Case
Cleaning an Otterbox silicone case is quite easy. It’s imperative to regularly clean your Otterbox to keep it germ-free and prevent trapped dirt and other debris from damaging your phone.
Cleaning silicone Otterbox takes a similar approach to cleaning silicone cases. You simply open the case by detaching any snaps holding the case in place. Then clean with mild dish soap in warm water. Disinfect with alcohol wipes. Finally, leave it to air dry before placing your phone back in it.
Here are the steps on how to clean silicone Otterbox cases.
Disbanding the Case
- Read Product Manual
Before you start the cleaning process, you would want to go over case removal instructions. Note that case removal instructions vary based on the phone’s make and model number. Find case removal instructions here: https://www.otterbox.com/en-us/case-instructions.html
- Take your phone out of the Otterbox case and set it aside
Remove your phone from the case by holding the silicone by one of the bottom corners of the case and pulling the corners towards you. Follow throughout the perimeter of the phone to totally separate the case from the device.
- Disband the case
Next, open up the case by releasing the snaps placed in the grooves. Use a sharp object or your fingernail to pull the snaps from the grooves one at a time to open the case. Be careful not to break the case.
Washing and Disinfecting the Case
- Mix mild soap and warm water in a small bowl
Add two or three drops of mild soap in a bowl containing 1 cup of warm water. You can either use dish detergent or liquid hand soap.
- Scrub the case with a soft-bristle toothbrush
Scrub the entire case with a toothbrush in a circular motion. Thoroughly scrub stains on the surface of the case.
- Rinse and wipe with an alcohol wipe.
After you’re done scrubbing, remove the case from the bowl and rinse off with warm running water. Shake off any excess water then wipe with the alcohol wipes to disinfect.
- Let the Case Dry Overnight
Unlike silicone cases, Otterbox cases take quite some time to completely dry. Place your case on a paper towel on a countertop. Leave overnight or for a few hours to air dry. Ensure the case is completely dry before assembling it and placing your device back into the case.
Research has shown that cell phones are ten times dirtier than a toilet seat. Our phone cases collect germs and dirt as we go about our daily businesses. Nonetheless, we can still keep your phone cases clean, attractive and germ-free by cleaning and disinfecting regularly. Don’t take a mirror selfie with a dirty phone case. The information shared in this article will enable you to keep your silicone iPhone case, silicone Otterbox case and silicone AirPods case clean and free of disease-causing germs.